silicone rubber的例句大全

The fractures of silicone rubber are observed and microscopic mechanism of failure is studied with SEM.

采用扫描电子显微镜,观察了硅橡胶断口的特征形态,分析了其微观破坏机理.

Additional Liquid Siliconc rubber is a special Rind of silicone rubber, whichpossess unique properties.

加成型双组份液体硅橡胶是一种具有一系列独特性能的硅橡胶.

The Paper Summarizes the technology development and ontlook of one component room temperature Vulcanized silicone rubber.

总结了单组份室温硫化硅橡胶的技术发展及市场概况.

For cots, smoothing, preferably made of silicone rubber rollers.

要求上胶辊细腻 、 平滑, 最好是硅橡胶制成的胶辊.

The vulcanization mechanism , composition , application of addition type liquid silicone rubber are reviewed.

介绍了液体硅橡胶的成型工艺 、 成型设备及其特点.

Figure 1-2 shows the organization of blood vessels in a rat kidney injected with silicone rubber.

图 1-2 系用硅橡胶注射的大鼠肾脏的血管结构.

Silicone rubber is a macromolecule polymer, and can suffer a large deformation.

硅橡胶是一种高分子聚合物, 可以承受大变形,用途广泛.

Silicone rubber and plaster of Paris have been used successfully.

硅橡胶和熟石膏作铸模亦已取得成功.

The effect of various recipe factors on radiation resistance of phenylene silicone rubber was investigated.

研究了配方因素对苯撑硅橡胶耐辐照性能的影响.

Solid silicone rubber is still the major clinical applied materials in rhinoplasty.

固体硅橡胶目前仍是临床隆鼻术主要的应用材料.

Blowing agent AK was used to preparing silicone rubber sponge.

采用发泡剂AK制作了硅橡胶海绵.

Baolong tree 100 years to do a first-class silicone rubber.

树百年宝龙达,做 一流 硅酮胶.

Furthermore, rapid manufacturing technology of silicone rubber mould also gains extensive attentions.

基于快速成型技术的硅橡胶模具快速制造技术亦得到了越来越广泛的关注.

The silicone rubber foam has excellent properties about cushion and energy absorbering.

泡沫硅橡胶在缓冲减振方面有独特的优良性能.

Various kinds of mixes and products, based on fluororubber (-40℃ -- 200℃ ), silicone rubber (-70℃ -- 300℃ ) and fluoro-silicone rubber.

各种性能的氟橡胶混炼胶 ( -40℃ --200 ℃ ) 和制品 、 硅橡胶混炼胶 ( -70℃ --300 ℃ ) 和制品、氟硅橡胶混炼胶和制品.

Compounding Agent of RTV Silicone Rubber of Condensed Type(ⅲ)

缩合型室温硫化硅橡胶的配合剂（三）

The factors of influence on shear strength of heat curing silicone rubber/ aluminum alloy were studied.

研究了影响热硫化硅橡胶与合金铝粘合剪切强度的几个因素。

Study on Blend Vulcanization System of Heat Curing Silicone Rubber

热硫化硅橡胶并用硫化体系的研究

These suggested that the liquid crystal/ silicone rubber crosslinked membrane and the ionomer membrane were benefit to improve oxygenation performance of membrane artificial lung.

表明液晶／硅橡胶交联膜和离聚体膜有利于提高膜式人工肺的氧合效果。

The open cell silicone rubber foam materials were prepared by using solving bleeding technique.

采用溶析成孔技术制备的硅橡胶泡沫材料,随着成孔剂用量增大,其密度减小,孔隙度提高.